SKM 5200-II
世界的に認められたマイクロホン SKM 5200 の次世代バージョン。スイッチング帯域幅を最大 184MHz に拡張。固定と可変の2つのチャンネルバンク。干渉イミュニティを向上させる低インターモジュレーションモード。堅牢なハウジング。


世界的に認められたマイクロホン SKM 5200 の次世代バージョンである SKM 5200-II 。堅牢性と信頼性に優れ、ユーザーフレンドリーなプロフェッショナル仕様のハンドヘルドマイクロホンで、あらゆるタイプのレコーディングや伝送環境に最適です。メカニクス、エレクトロニクス、操作性のいずれも、ライブイベントの極めて厳しいニーズにも応えられるよう設計しました。

184MHz というスイッチング帯域幅も、こうした設計理念の現われです。ゼンハイザー独自の「HiDyn plus」ノイズリダクションシステムは、RFノイズを最小限に減衰させて、幅広いダイナミックレンジとクリアなサウンドを実現。プログラミング性も柔軟性に優れ、固定と可変の2つのチャネルバンクを設けました。すべてのパラメーターはバックライト LCD で表示。偶発的な設定変更を防ぐためにロック機能を内蔵し、パラメーターは数秒でチェック可能です。

SKM 5200-II は周波数違いで L 、N 、N-US 、P の4モデルがあり、ブラック、ニッケル、スチールブルー(ヘマタイト)の3色展開。5000 シリーズのすべてのカプセル、バッテリー、充電式バッテリーコンパートメント、および Neumann マイクヘッドと互換性があります。

  • 最大 184MHz のスイッチング帯域幅

  • 低インターモジュレーションモード(LoI)

  • スイッチャブル出力

  • 受賞歴のあるデザイン

  • 1dB 刻みで調節できる -40~0dB のオーディオ感度

  • 単3電池2個で7時間稼働

  • 5kHz 刻みで調節できる周波数

  • 便利なジョグダイヤル

  • スイッチャブルローカット

Pro Talk Video Series

Pro Talk Video Series

YouTubeのPro Talk Video Seriesのエピソードをお見逃しないよう、是非ご登録くだ い! さらに詳しく
Be the first to write a review.



Product Phone

  • What are the operating frequency ranges of the different wireless microphone systems?

  • What do I do when there is "noise" in the wireless system?

    It is likely that the noise/static/interference you’re experiencing is being caused by a background RF signal from an external source (ie: broadcast TV or radio stations, other wireless microphones, etc) on the same frequency as your wireless system.

    This can be confirmed this by turning off the transmitter and checking the receiver’s display. If there is an RF signal showing on the receiver's display when the transmitter is off that indicates that the receiver is picking up an RF signal from an external source and the receiver is trying to tune this external RF signal which will sound like a broad white noise.

    One of the most important steps for proper setup is turning on the receiver first and checking what it sees in the absence of your microphone signal. If the receiver sees an RF signal being generated by an outside source (ie: noise) then you need to retune the system. Depending on which system is being used the exact steps on how to change frequencies will vary. NOTE: When using multiple wireless systems the frequencies need to be co-ordinated together to ensure that they do not interfere with each other.

    Once a new frequency is selected get back to the receiver's main display. If there is no RF registering then this new frequency is a "clean" frequency on which to operate.

    Keep in mind the RF environment changes from location to location so it is important to always check the receiver for RF levels before turning on the transmitter. It is best practice to always do a frequency scan when using equipment in a new location.

    The RF environment is often constantly changing so a frequency scan is really only completely accurate for the exact time that the frequency scan is done (ie: a frequency scan done on Wednesday night could yield different results to a frequency scan done on Sunday morning). Ultimately to ensure a frequency scan is still valid you want to turn on the receivers and leave the microphones off. In this state the receivers should be showing no RF signal to indicate that they are on a clean usable frequency. If you turn on the receivers (with the microphones off) and you are seeing a lot of RF activity that indicates that something in the RF environment has changed and now the frequency which was previously "clean" (and hence usable) is now "dirty" (ie there is an external RF signal on it) and you will need to set the receiver to use a different frequency.

  • What frequency can I use outside of the United States?

    There are no universal rules which govern the use of wireless microphone equipment globally. The rules and regulations regarding which frequencies are allowed for wireless microphones vary widely by country. All Sennheiser products that are sold in the US are congruent to the US rules and regulations as mandated by the FCC.

    We can provide information regarding rules and regulations for the US, however because rules and regulations vary from country to country, we cannot advise which frequencies to use outside of the US. Unfortunately there is no universal database that contains all this information. 

    For information about the rules and regulations for a specific country it is recommended that you directly contact the embassy of the country in question to find out the rules and regulations or contact the Sennheiser subsidiary or partner company in the country in question.  You can find contact details for these subsidiaries and partner companies here: (

  • Why is it illegal to use wireless microphones in the 700 MHz range in the USA?

    In June 2010 the FCC instituted regulations that made it illegal to operate wireless microphones within the 700 MHz frequency range in the United States.

    With the transition to digital television TV broadcasters vacated a large section of the UHF spectrum (from 698 to 806 MHz) so the FCC auctioned the 700 MHz band to the highest bidders (including AT&T and Qualcomm) to facilitate the development of wireless broadband Internet service throughout the United States. In addition, the FCC has reserved select frequencies in the 700 MHz band for emergency and national security purposes.

    NOTE: The FCC is the Government agency tasked to regulate interstate communications by radio, television, wire, satellite, and cable in all 50 states, the District of Columbia and U.S. territories. The FCC sets the guidelines and regulations for all broadcast equipment (including wireless microphones).


  • 操作マニュアル
  • EU適合宣言書
  • ファームウェアのアップデート
    • Sennheiser Firmware EM 373x Version 2.2.0 incl. SK 5212-II/SKM 5200-II Version 3.1.0 (530 KB) ダウンロード

  • Frequency Sheets
    • Frequency tables SKM 5200-II (180 KB) ダウンロード

      Frequency tables SKM 5200-II for frequency range P, L and N

  • アプリケーションソフト
  • 安全に関する注意事項と規制に関する情報
  • Release Notes